燃料电池系统空气供应内模解耦控制器设计
作者:
作者单位:

同济大学,同济大学

作者简介:

通讯作者:

中图分类号:

TM911.4

基金项目:

科技部重大仪器专项(2012YQ150256)


Internal Model Decoupling Controller Design for High Pressure PEMFC Air Supply System
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    针对高压质子交换膜燃料电池空气供应系统的空气流量和进气压力具有较强的耦合性这个特性,将内模控制原理与多变量解耦控制理论相结合,提出了空气流量和进气压力的鲁棒解耦控制策略.仿真结果表明,采用内模解耦控制不仅能实现被控量的解耦,而且在系统模型失配的情况下可以获得比传统PID(比例积分微分)解耦控制器更好的鲁棒性;同时控制器参数少,整定简单.

    Abstract:

    In view of the strong coupling between air mass flow and back pressure in the air supply system of high pressure proton exchange membrane fuel cell (PEMFC), a robust decoupling controller that combined the principal of internal model control (IMC) with multiple variable decouple control theory is proposed. The simulation results show that the internal modeldecoupling controller can not only provide a nice decoupling, but also get a much better robust performance compared with the traditional proportionintegralderivative (PID) decoupling controller when the real system does not match well with the nominal model; moreover, the proposed controller is also featured with less controller parameters and easy to be tuned.

    参考文献
    相似文献
    引证文献
引用本文

陈凤祥,陈兴.燃料电池系统空气供应内模解耦控制器设计[J].同济大学学报(自然科学版),2016,44(12):1924~1930

复制
分享
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:2015-11-04
  • 最后修改日期:2016-10-31
  • 录用日期:2016-09-12
  • 在线发布日期: 2017-01-10
  • 出版日期: