铝合金构件高强螺栓牙板连接性能试验
作者:
作者单位:

同济大学土木工程学院,同济大学土木工程学院,同济大学土木工程学院

作者简介:

通讯作者:

中图分类号:

TU395

基金项目:


Experimental Research on High Strength Bolted ZigzagPlate Connections of Aluminum Alloy Members
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    主要对铝合金构件采用高强螺栓牙板连接进行初步试探性的理论分析和试验研究.分析结果表明:连接承载力与螺栓预压力、板件厚度、牙纹规格等因素有关,并初步得出了承载力的计算公式.进行了4组铝合金构件高强螺栓牙板连接的抗剪承载力试验,试验结果表明:高强螺栓牙板连接具有变形小、承载力高等特点,而且较普通的摩擦型高强螺栓连接承载力有明显提高,主要是因为“牙板”增大了受力方向的抗滑移系数.

    Abstract:

    This paper focuses on the premature theoretical analysis and experimental research of high strength bolted zigzagplate connections of aluminum alloys. It is found that the factors affecting the bearing capacity of the connection are prestress in boltes, thickness plates and zigzag dimensions. Shearresistant capacity tests were conducted for aluminum alloy component with high strength bolted zigzagplate connections (HSBZP). The test results showed that high strength bolted zigzagplate connections had copious advantages including but not limited to reliable force transferring, comparatively slight deformation and much higher capacity than regular slipcritical bolted connections, The zigzag plates increased the slip resistance of the connection.

    参考文献
    相似文献
    引证文献
引用本文

蒋首超,叶中楠,郭小农.铝合金构件高强螺栓牙板连接性能试验[J].同济大学学报(自然科学版),2016,44(9):1333~1339

复制
分享
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:2015-11-11
  • 最后修改日期:2016-06-14
  • 录用日期:2016-05-03
  • 在线发布日期: 2016-10-10
  • 出版日期: