板式省煤器通道结构对换热特性的影响
作者:
作者单位:

同济大学机械与能源学院,同济大学机械与能源学院,同济大学机械与能源学院

作者简介:

通讯作者:

中图分类号:

TK172

基金项目:

51574179


Effect of Channel Structure for Board Economizer on Heat Transfer Characteristics
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    通过软件Fluent数值模拟与试验验证,研究全焊式板式省煤器在不同结构参数和烟气流速情况下的传热特性.结果表明,当换热器椭圆水流道长轴为30 mm,循环水流道的短长轴比为0.6,板间烟气流道间距控制在15 mm,且烟气流速控制在8 m?s-1时,全焊式板式省煤器的综合换热系数达到50 W?(m2?K)-1.

    Abstract:

    The heat transfer characteristics of allwelded plate economizer in different structure parameters and flue gas velocities were numerically simulated using Fluent and experimentally verified. The results show that the whole welding type plate heat exchanger whose major axis of the ellipse is 30 mm has the highest heat transfer coefficient, when the ratio of the shortlong shaft is 0.6, the flow path in interboard spacing of flue gas is controlled at 15 mm, and the rate of flue gas flowing is in 8 m?s-1. The highest heat transfer coefficient is about 50 W?(m2?K)-1.

    参考文献
    相似文献
    引证文献
引用本文

吴俐俊,袁志成,王小柳,鞠贵冬.板式省煤器通道结构对换热特性的影响[J].同济大学学报(自然科学版),2016,44(8):1248~1252

复制
分享
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:2015-12-02
  • 最后修改日期:2016-05-27
  • 录用日期:2016-04-13
  • 在线发布日期: 2016-09-06
  • 出版日期: