超高性能混凝土组合箱梁弯曲性能有限元分析
Finite Element Analysis of Ultra High Performance Concrete Composite Box Girder
投稿时间:2017-10-13  修订日期:2018-03-09
DOI:10.11908/j.issn.0253-374x.2018.04.002     稿件编号:    中图分类号:U448.2
 
摘要点击次数: 307    全文下载次数: 151
中文摘要
      采用有限元方法对4种超高性能混凝土(UHPC)混凝土组合箱形截面简支梁(全截面C60、顶板替代为UHPC、底板替代为UHPC、全截面UHPC)的弯曲性能进行研究.分析前,为验证ANSYS软件对UHPC材料模型模拟的准确性,对1根矩形UHPC混凝土组合梁开展试验对比分析.根据对比分析结果确定建模方法,得到4种组合箱梁的应力分布、受力性能,总结了相应类型结构的特点.综合考虑材料性能的利用率、裂缝发展模态、极限承载力和经济性,提出相应的设计建议.
英文摘要
      Finite element analysis method was used in the research to check the mechanical characteristic of the 4 kinds of UHPC concrete composite box girders(C60 concrete total cross section, only UHPC roof, only UHPC bottoms and UHPC total cross section). The accuracy of ANSYS analyzing and calculating for complex model should be verified before by using the test and the contrastive analysis of a rectangular UHPC concrete composite beam. The ANSYS modeling method is determined by the result of comparative analysis in the same time. The stress distribution, bearing performance of 4 kinds of box girder were studied in the research. The structural behavior was summarized. The utilization of material properties, ultimate bearing capacity, strain distribution and economy should be considered, and some design advices were also given in the paper.
HTML   查看全文  查看/发表评论  

您是第4440224位访问者
版权所有《同济大学学报(自然科学版)》
主管单位:教育部 主办单位:同济大学
地  址: 上海市四平路1239号 邮编:200092 电话:021-65982344 E-mail: zrxb@tongji.edu.cn
本系统由北京勤云科技发展有限公司设计