面向增材制造的零件结构及工艺设计
Structure Design and Process Planning aor Additive Manufacturing
投稿时间:2019-09-23  修订日期:2020-05-20
DOI:10.11908/j.issn.0253-374x.19393     稿件编号:    中图分类号:TH122
 
摘要点击次数: 46    全文下载次数: 40
中文摘要
      从零件结构设计中的拓扑优化、介观结构、零件整合、流体管道及热交换器设计方面和工艺设计中层内轨迹、建造方向、多轴建造及曲面分层设计方面系统地论述了国内外面向增材制造的零件设计的研究进展,并在此基础上提出了AM零件一体化设计、多尺度下异构胞状结构设计、面向零件性能的工艺设计以及连续碳纤维增强复合材料工艺设计四个未来发展趋势。
英文摘要
      Systematically discusses the state-of-the-art research of parts design for additive manufacturing from the aspects of structure design with topology optimization, mesoscopic structure, parts integration, fluid pipeline and heat exchanger, and the aspects of process planning with toolpaths, buliding direction, multi-axis construction and curved layers. On this basis, AM parts integration design, multi-scale heterogeneous cellular structure design, performance-oriented process planning and process planning for continuous carbon fiber reinforced composites as the potential development directions were proposed.
HTML   查看全文  查看/发表评论  

您是第7195951位访问者
版权所有《同济大学学报(自然科学版)》
主管单位:教育部 主办单位:同济大学
地  址: 上海市四平路1239号 邮编:200092 电话:021-65982344 E-mail: zrxb@tongji.edu.cn
本系统由北京勤云科技发展有限公司设计